M1 Operating
1
TURNING ON YOUR MILK MAKER
Turn on the power by switching the power switch located at the back of the base. Once the power switch is on, the M1 display will light up and prompt you to set the blend time.
Note: If there is no activity for 5 minutes, the display will go dark. Simply press the button to re-engage the display and continue using the machine.
2
SETTING THE BLEND TIME
Rotate the control knob to adjust the blending time depending on the type of milk you’re making and the consistency you prefer.
3
STARTING THE M1
Once you’ve set the desired blend time, press the “Start” button to activate the blending process.
4
OPEN SPOUT
Once blending is complete, the display will prompt “open spout.” Open the spout to start the spin cycle. This will allow the liquid to start flowing into the pitcher.
5
SPIN CYCLE
After 10 seconds, the M1 will automatically begin the spin cycle. The spin cycle ensures that every drop of milk is extracted from the pulp.
Note: The spout should remain open during the spin cycle.
6
CLOSE THE SPOUT
When the spin cycle finishes, close the spout. Your milk is ready to be enjoyed.
