C2 Blender Set Up


Turn off

Turn the control knob to the center position.


Plug in the power cord

Connect the power cord to the back of the base. Then, plug the power cord into an outlet.


Secure the lid

Insert the dosing cap into the center hole on the lid and turn clockwise to lock it. Place the lid onto the jug with the corners aligned with the top of the jug. Press down firmly to secure lid clips.


Install the base

Line up the four corners of the bottom of the jug with the four corners on the base. When assembled correctly, the LED display will illuminate “BLEND.”

Note: The jug can be installed in four positions with the handle on each corner.

Watch the Entire Assembly

Additional Guides